Schedule Estimate

 

 

On this page down the page you will find lots of very good material on the subject of How to Troubleshoot and Repair an Electric Water Heater.

Several contemporary homes utilize an electrical hot water heater for their heating unit, due to its comfort and also simplicity of use. Nonetheless, similar to any other electric appliances, problems may emerge with its usage, all of a sudden. It can be truly irritating to wake up to a cold shower instead of a warm one or having your bathroom with water that isn't hot sufficient or perhaps too hot. Whatever the instance may be, water heater issues can be fairly nerve-racking. Thankfully, we have actually made a checklist of possible options to your hot water heater issues. There are a number of aspects that can cause a lot of these issues, maybe a concern with the power supply, the electrical heating element, or the thermostat. Before doing anything, guarantee you switch off the main power supply for safety. Whatever the issue is, getting it taken care of need to not pose excessive of a problem if you adhere to these actions:

 

Call A Specialist:

If after changing all damaged parts and resetting your temperature, the water heater still isn't working, you might require to speak to a specialist plumber for a specialist point of view. The problem with your heater could be that the hot and cold taps have been changed or it may be undersized for the amount of hot water needed in your home. Whatever the situation might be, an expert plumber would certainly assist fix the trouble.

 

Examine Your Power Supply:

As standard as this might appear, it is really required. Without sufficient power, your water heater will not function. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power problem. Check if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, merely transform it on and off once again. Change any type of damaged or worn-out fuse. Evaluate the home appliance with power after these modifications to see if it's now working.

 

Examine Your Thermostat:

If your hot water heater still isn't functioning or the water appearing isn't hot enough, you may require to examine the temperature level setups on your upper thermostat. Guarantee the circuit breaker is turned off prior to doing anything. Open up the gain access to panel and press the red button for temperature level reset over the thermostat. This must help heat the water. Transform the breaker back on as well as check if the problem has actually been solved.

 

Inspect the Heating Element in the Water Heater:

If it's not a power trouble, after that try having a look at your heating element if it is still functioning. Check each of your heating elements to ensure the trouble isn't with any of them. If any of them is damaged, change that part and then inspect whether the hot water is back on.

 

Verdict

Hot water heater troubles are not constantly major. Many of them result from minor issues like a blown fuse or damaged heating element. Changing the damaged components need to work. However, if you are still incapable to resolve the problem, give a call to your local plumber to find to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I discovered that article on How to Troubleshoot and Repair an Electric Water Heater when doing a search on the internet. Those who appreciated our page plz don't forget to pass it around. Bless you for your time. Kindly stop by our site back soon.

Go Company